this is the prototype for a add on bracket for ANY vortech pass. side blower,comes comeplete w/ novi style tensioner ,bolts,spacers ,and outer plate.allows you to put max tension on the belt while eliminating the common bracket flex from the stock setup...just trying to guage some interest....
Last edited by swilldup; 01-17-2005 at 10:55 PM.
dale@swillracing
That looks killer - sticky worthy :)
Ian
How much?
I was thinking the same thing.
What kind of price are we talking? Will this still work with a 10 rib set up?
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
Another for how much?
well like i said this is the prototype...ill be getting some figures together in the next few days
dale@swillracing
Have you come up with any #'s???? That could be a hot seller.
Ballpark figure will be around $300, still waiting on some firm numbers though, so it may be higher. Dale hopes to keep it under that though.
So is anybody interested?
Not at $300. Sorry it seems pretty high for a piece of steel and some bolts, and sleeves.
You are also forgetting about the new tensioner set up.Originally Posted by Guilt Trip
$300 is fairly steep...
up
yo; when are these peices availble as I'm very interested.
not at that price, sorry. Looks nice though.
[SIZE=7]Vortech S-Trim (~12 psi), SMC Alcohol Injection System, Power Pipe, 7.25" CFM crank pulley, TFS Stage1 cam, TFS TW Heads, TFS Track Heat intake, 65mmTB, 77mm maf, 42lb inj, Walbro GSS340, Boost-a-Pump, aluminum d/s, Tremec 3550, SPEC Stage3 clutch, SPEC aluminum flywheel, 3.73's, MSD 6al, Griffin NASCAR radiator, BBK Ceramic long tubes, Ultra Flow cat-back, Cobra 4 wheel disc brakes....
On Deck: 3.15" pulley, HKS SSQV bov, SN95 fan[/SIZE]
Posting Permissions
Reply With Quote
Bookmarks