Anybody happen to have a 93 Cobra water pump pulley laying around that they would want to sell? I am looking into putting the 8" crank pulley on my car, :D and need the smaller water pump pulley. Shoot me an email if you have one: chagen@fastwave.biz
Thanks
Chris
Elevation kills boost!
LX = 13.47 @ 102.49, 1.80 60', at 6900' DA
Cobra = 12.82 @ 109.25, 1.98 60' at 5400' DA
do you have a Novi 2000 or 1000?
89 GT TFS Heads Systemax Intake
TFS 2 cam 3:55s Novi 2000 42#ers
466hp / 409 torque ;)
10.58 @ 121 mph
I have the old 1000 with the single belt setup.
Chris
Elevation kills boost!
LX = 13.47 @ 102.49, 1.80 60', at 6900' DA
Cobra = 12.82 @ 109.25, 1.98 60' at 5400' DA
ahh ok...i am trying to find a belt to fit my 8 inch crank on the novi 2000
89 GT TFS Heads Systemax Intake
TFS 2 cam 3:55s Novi 2000 42#ers
466hp / 409 torque ;)
10.58 @ 121 mph
hey clint do you have the 8 rib? It should be anywhere from 59"-59 5/8". I'm sure my old one won't work for the 351.
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
nope. i am using the 10 rib but the length you used might help me some....whats the size of your blower pulley?
89 GT TFS Heads Systemax Intake
TFS 2 cam 3:55s Novi 2000 42#ers
466hp / 409 torque ;)
10.58 @ 121 mph
I don't know if your tensioner makes a large adjustment like the revised 1000 kits though. run the longest belt you can to keep the egde of the belt off the WP pulley. you'll see what i mean and it's a no brainer.
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
I have a 93 cobra w/p pulley I have had for years and never installed!
Thanks but I bought one back in Jan ;)
Chris
Elevation kills boost!
LX = 13.47 @ 102.49, 1.80 60', at 6900' DA
Cobra = 12.82 @ 109.25, 1.98 60' at 5400' DA
Posting Permissions
Reply With Quote
Bookmarks