Results 1 to 10 of 10

Thread: oil coolers

  1. #1
    Senior SCH Member
    Join Date
    Jan 2003
    Posts
    110

    oil coolers

    anyone using one with their vortechs? if so did you see a decent decrease in oil temp, also how about a increase in oil pressure?
    --
    93 GT

  2. #2
    Senior SCH Member
    Join Date
    Jan 2003
    Location
    sw sub chicago
    Posts
    169
    yep, i have one. its a B&M, the small polished one. since i didn't want to run lines forward of the engine i put it under the crank pulley. i was going to run a duct to it as it wasn't in direct air flow. but putting the FMIC in has freed up some front air so it will get direct airflow now.

    i am about to install an oil temp gauge, so i can't tell ya that. but i'm sure it sends cooler oil to the blower, and its going to get even cooler oil. i noticed no change in pressure.

    in the pic. thats the sway bar. above is the ram air duct
    97 ex cab 3dr, black, stock 4.3, VORTECH V2 SQ / PowerStroke FMIC, A4

  3. #3
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012
    I use the Ford racing heavy duty until on my NOVI car. Works great, lowered temps 20-30 and did not effect oil pressure.

    The electric fan really helps in traffic!

    Ian

  4. #4
    Senior SCH Member
    Join Date
    Jan 2003
    Location
    sw sub chicago
    Posts
    169
    umm ... are we talking engine oil cooler, or blower oil cooler ?
    mine is for the blower only.

  5. #5
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012
    Sorry not sure if he means engine or blower, mine is for engine ;)

    Ian

  6. #6
    SCH Member
    Join Date
    Jan 2003
    Posts
    98
    Originally posted by V2-SQ Jess
    umm ... are we talking engine oil cooler, or blower oil cooler ?
    mine is for the blower only.
    Please explain why you did this? Was you hoping it would help to lower the blowers temp this making more power? I've thought about doing this but didn't really think it would help any.
    93 LX
    R331/AFR 205/Vic 5.0/? psi

  7. #7
    Senior SCH Member
    Join Date
    Jan 2003
    Location
    sw sub chicago
    Posts
    169
    Originally posted by novipower
    Sorry not sure if he means engine or blower, mine is for engine ;)

    Ian
    no need to be sorry bro :) . looking back, he probably does mean engine cooler. that said. myself, i see no need for an engine oil cooler. unless you tow, haul heavy loads, do circles at the track, or road race. i don't, and i doubt you do. i had a stock oil cooler, took it off.

  8. #8
    Senior SCH Member
    Join Date
    Jan 2003
    Location
    sw sub chicago
    Posts
    169
    Originally posted by Forcedpower
    Please explain why you did this? Was you hoping it would help to lower the blowers temp this making more power? I've thought about doing this but didn't really think it would help any.
    2 reasons

    1, hoping it would cool the intake charge some.
    does it ? = probably not enough to notice.
    2, reliability. i'm hoping the cooler oil would make the unit happier and thus last longer. does it ? no way for me to know

    but, you know what they say : every little bit helps. and it looks cool

  9. #9
    Junior SCH Member
    Join Date
    Jan 2003
    Posts
    6
    I have the Kenny Brown oil cooler on mine and I did it to keep the oil temp in the engine lower. With the blower I am trying to keep the engine temp as cool as possible. I don't think it has made any difference in the air temp in the blower.
    Kenny Brown '01 Cobra S
    serialized #01-047C
    True Blue Performance Forged Short Block
    Fluidyne Radiator
    FMS 11" clutch and aluminum flywheel
    Steeda dual pump fuel system w/return
    Vortech Supercharger W/After Cooler
    Kooks Long Tube Headers
    H-pipe with High Flow Cats
    Bassani Cat Back
    Steeda Tri Ax Shifter
    KB Oil Cooling system
    KB Diff Cooling system
    Autometer Phantom boost and fuel pressure guages
    Kenny Brown Aero Kit
    4 Program flip chip (superchip)
    507 RWHP 453 Torque

  10. #10
    Senior SCH Member
    Join Date
    Jan 2003
    Posts
    110
    i think i will put the extra temp prob i have for my egt in the discharge tube and see if the oil cooler makes a difference in discharge temps from a before and after comparison. probably not though.
    --
    93 GT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •