VR4 install

[Lethl Injctn]

i need somebody in so cal who wants to install my vr4 for a nominal fee, lmk thnx scott

[speedytang]

It is a really easy 4 hour job if you have all the parts.

[Lethl Injctn]

i need somebody to mount it and install the air tubes and hookup the oil lines and pulley, i already have the fmu and the bracket mounted, i hurt my back need i say anymore, its on a 94 stang. scott

[Doug]

Scott,
What part of So Cal do you live in?

Doug

[Lethl Injctn]

antelope valley north of la

[speedytang]

No oil lines on a VR4. Just need to mount the bracket and move the Alternator to the bracket and the two tubes and your done. I would think someone in Cali could help you out. I will check my contact database and if someone is close I will post information by permission and maybe you can email them

[Lethl Injctn]

the bracket and alt are done, i need the head, pulley and tubes hooked up,crank pulley is on and the fmu,fuel pump are on also. i dont have any tubes and dont know how they run or what i need, also need the belt. thnx for you help scott

[Lethl Injctn]

i need these parts to finish the vr4, need tensionor pulley, one 4" 8Groove head unit pulley, 2 key ways, and 1 inlet tube elbow assy please email with price asap thnx guys scott

[speedytang]

www.aspracing.com sells the pulleys you need. The intake elbow is so large you usually need a power pipe to get the benefits of the VR4. Power pipe is $200 but maybe if you post in the sell section you can find one used.