-
Junior SCH Member
SN 93 rebuild diagram
Hello, My name is Michael. I have a 98 Club Cab Dakota, Paxton SN 93, 406 ci. Stroker.
I am rebuilding my Paxton, Does anyone have a rebuild diagram for the SN 93? I just replaced the bearings and seals in the one on my 98 Dakota, and I am putting it back together. I also need to know if the pulley or any other part of the unit has to be torqued properly, if so what are the torque values? Also I broke the spring that secures the oil pickup. Where can I get a replacement spring?
-
SCH Moderator "SN Guru"
I have never taken pictures during dis-assy so can't help you on that. I guess you did not record the torque when removing the internals so now it is guess time because I don't think Craig will help at Paradise Wheels but you can try. The spring you can get at any hardware store or a multi pack at the parts store under the 'HELP' name.
-
Junior SCH Member
Thanks for the help on the spring. I went to the hardware and found almost an exact match.
-
Junior SCH Member
Any idea how much oil does the SN 93 hold in it's case?
-
SCH Moderator "SN Guru"
8oz then check the stick because fluid goes into the pump tube.
-
Junior SCH Member
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks