can i use my 86-93 novi 2K on a 351??? i would think the brackets would be a little different but is it possible? does soemone make a braket adaptor kit? thanks
can i use my 86-93 novi 2K on a 351??? i would think the brackets would be a little different but is it possible? does soemone make a braket adaptor kit? thanks
`90 LX Hatch
Keith Craft 306
TFS Track Heat Heads
TFS Track Heat Intake
Accel 300+ Ignition & Coil
80mm Pro-M
75mm Accufab TB
55lb. High Imp. Injectors
Anderson B-3 Cam
3.73
Lakewood 70/30 struts
Tremec 3550 w/ Hurst
255lph in-tank
255 in-line pump
JMS Chip
Morpheus Powerpipe
Novi 2000 (stock pulleys)
Alternative Auto modifies the brackets. They are the only shop that I know does it for sure. The only differance in the plates is one hole has to be drilled where the bolt threads into the block through the cast back bracket. I have the set up on mine if you need a pic I will try to get you one.
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
yes, definitly, send me a pic or two, they want $225 to do it plus shipping!!! if i can do it myself that would save me some money. thanks bryan
`90 LX Hatch
Keith Craft 306
TFS Track Heat Heads
TFS Track Heat Intake
Accel 300+ Ignition & Coil
80mm Pro-M
75mm Accufab TB
55lb. High Imp. Injectors
Anderson B-3 Cam
3.73
Lakewood 70/30 struts
Tremec 3550 w/ Hurst
255lph in-tank
255 in-line pump
JMS Chip
Morpheus Powerpipe
Novi 2000 (stock pulleys)
yes, definitly, send me a pic or two, they want $225 to do it plus shipping!!! if i can do it myself that would save me some money. thanks bryan bhollie@cox.net
`90 LX Hatch
Keith Craft 306
TFS Track Heat Heads
TFS Track Heat Intake
Accel 300+ Ignition & Coil
80mm Pro-M
75mm Accufab TB
55lb. High Imp. Injectors
Anderson B-3 Cam
3.73
Lakewood 70/30 struts
Tremec 3550 w/ Hurst
255lph in-tank
255 in-line pump
JMS Chip
Morpheus Powerpipe
Novi 2000 (stock pulleys)
Bookmarks