Results 1 to 5 of 5

Thread: How to change oil on SN-89s?

  1. #1
    Junior SCH Member
    Join Date
    Jun 2004
    Posts
    10

    How to change oil on SN-89s?

    Everytime i look @ this compressor, all i see is the damm oil dip stick and allen key right bolts... Where do i remove the oil oil from?


    Thanks

  2. #2
    SCH Moderator "SN Guru" speedytang's Avatar
    Join Date
    Dec 2002
    Location
    Marengo, Ohio
    Posts
    2,028
    Dipstick hole. Remove the fluid from that location. Suction it out and replace at correct level on the dipstick.

  3. #3
    Junior SCH Member
    Join Date
    Jun 2004
    Posts
    10
    Quote Originally Posted by speedytang
    Dipstick hole. Remove the fluid from that location. Suction it out and replace at correct level on the dipstick.

    So you mean flip the charger upside down?

  4. #4
    SCH Moderator "SN Guru" speedytang's Avatar
    Join Date
    Dec 2002
    Location
    Marengo, Ohio
    Posts
    2,028
    You can but it is easier to get a gravy sucker for turkeys and add small hose to the tip and suck it out. That is what Paxton shipped with the units when new.

  5. #5
    Junior SCH Member
    Join Date
    Jun 2004
    Posts
    10
    Thanks alot man

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •