Pullied for 29psi on stock long block

[musclestang89]

thats right there is a guy on dfwstangs.net that is putting this together. He is wondering what will happen on the dyno

here is the specs he will be using

-stock block
-stock heads
-255 in tank fuel pump
-kirban adjustable regulator
-edelbrock performer intake
-pro m 70 mm mass air
-stock throttle body
-stock 4 cylinder t-5
-stock rearend w/ 3.73's
-bbk shorty headers
-stock internals pistons, rods, and crank
-and to push all the air and gas down its throat is a novi 2000 renegade blower, supposed to be pullied at 29psi
-stock computer, no chip.
-msd coil
-stock distributor


go here to the thread
http://www.dfwstangs.net/forums/show...hreadid=181667

[Goliath5.0]

beautiful! :D

I wonder if me and this guy are kin in some way

[regattacoupe]

if he'd spend money on a fuel setup it would last alot longer thats for sure. I'd do something like that. :D

[sneakypony]

BOOOOOOOOOOOOOOM....shhhhhhh....thats what will happen

[WOHORSY]

if i were him i would buy plenty of speedy dry.

[root]

Hopefully nobody gets hurt when a rod comes flying out of the block.

Ian