thats right there is a guy on dfwstangs.net that is putting this together. He is wondering what will happen on the dyno
here is the specs he will be using
-stock block
-stock heads
-255 in tank fuel pump
-kirban adjustable regulator
-edelbrock performer intake
-pro m 70 mm mass air
-stock throttle body
-stock 4 cylinder t-5
-stock rearend w/ 3.73's
-bbk shorty headers
-stock internals pistons, rods, and crank
-and to push all the air and gas down its throat is a novi 2000 renegade blower, supposed to be pullied at 29psi
-stock computer, no chip.
-msd coil
-stock distributor
go here to the thread
http://www.dfwstangs.net/forums/show...hreadid=181667
Bookmarks