I have to may projects so I am posting this on every forum I visit . It kind of fits since it was built for a roots type blower that I no long own . I am located in Orchard Park NY 14127 and will meet a reasonable distance .

1979 Z28 clone
originally a v8 camaro now has all the spoilers, hood and 350 from a Z.
Crimson red with dual white race stripes

engine,
comp 280H cam, 280 degrees duration I/E, .480" lift
edelbrock performer RPM
462624 casting heads, 76cc chambers, 2.02"/1.60 SS manley Valves
speed pro cast hyperutechtic pistons, +.040"
stock rods shotpeened
stock iron crank
holley 4bbl carb, model 1805, vacuum secondarys.....600 cfm
custom HEI distributor
1 5/8" primary 4 to 1 headers into a 3"collector

trans
B+M clutches
both shift kits
2800-3000 RPM stahl convertor
stock internals
rear end
richmond 4.10:1 gears gm 10bolt 8.5 " carrier
moser axles rated to 425 whp
new clutch type limited slip unit

The motor was done in 2000 it is presently setup for a blower it only has8 1/2 to 1 compression and a big cam but the old guy I got it from was getting divorced and hadn't gotten that far .
the tranny was rebuilt winter of 2000-2001 and the rear end was done summer of 2002 .

I had hopes of swapping a good cam and having the heads shaved which would getit up to 9 1/2 to 1 or finding a cheap blower . It will be up to you .
$3800. o/b/o or trades with cash .