Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 37

Thread: Novi 2000 Belt Application Guide

  1. #16
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240
    6.87/3.00 uses a Mac Truck belt #88GB452P555 - 10 rib
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph

  2. #17
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    18
    I need to know what belt for a 7" and 3.25" 10 rib paxton novi 2000?

    If anyone has any ideas let me know.

    Jeremy
    Mexican Based 331 all forged and H-Beamed
    Custom Grind Supercharger Cam
    AFR 205's
    Holley SystemMax Stage 3 Ported Intake
    Paxton Novi 2000

  3. #18
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240
    it should be around 56.0 inches check your local parts store i believe they should have it...the oreilys and napa here did atleast
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph

  4. #19
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    18
    Thanks for the reply..

    You have any idea about part #.

    I have a Napa here local, but there are probably going to want a part #.

    Jeremy
    Mexican Based 331 all forged and H-Beamed
    Custom Grind Supercharger Cam
    AFR 205's
    Holley SystemMax Stage 3 Ported Intake
    Paxton Novi 2000

  5. #20
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240
    not sure on the part number...just tell them you need it to be 10 ribs and 56 inches...they should be able to look it up somehow
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph

  6. #21
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    18
    they dont make a belt that is 10 rib and 56.0, I found a 56.7 and that was about it, I think the one they had below it was like a 54?

    Anyone have any clues?

    Jeremy
    Mexican Based 331 all forged and H-Beamed
    Custom Grind Supercharger Cam
    AFR 205's
    Holley SystemMax Stage 3 Ported Intake
    Paxton Novi 2000

  7. #22
    SCH Member
    Join Date
    Nov 2003
    Location
    Midwest City, Ok
    Posts
    93
    I answered you on the corral, then I came to check here. I see you beat me to it.

    FoMoCo1 and I live near each other and have been searching through all these different combinations for the past month for both our motors. I didn't think they made a 56.0". You may try to go outside of the idler pulley and lengthen it to around a 57.5". Napa has a huge selection of 10 ribs from 56.5" up. They have almost every 1/2". I was going to one of their warehouse stores that I have a friend who works at and buying about 10 at a time (at ~$15-19 each). I was originally trying to do a 8" crank pulley to not void my warranty, but that didn't work. Now I have both a 3.00" and 2.75" pulley.

    Anyway... you'll lose contact area, but you may find one that works if you go to the outside of the idler pulley.
    1991 LX hatch AOD - Dart block, 3.25" crank, H-beams, Ross pistons, Novi 2k, TW heads, Performer RPM, 75mm TB, 80mm MAF, Bennett cam, 60lb inj., AFM Powerpipe, Kooks LTs, Snow Performance methanol/water injection, enough fuel for the Space Shuttle Discovery

    Old Combo - 148k mile stock bottom end, P&P E7s, AOD, NX wet kit
    428.3rwhp 566.7 rwtq

    Whoever said money can't buy happiness never had a wife with breast implants. ;)

  8. #23
    Junior SCH Member
    Join Date
    Feb 2004
    Posts
    13
    A tech at Paxton gave me the p/n for a Mack truck belt that is 55.5", 88gb449p555, might want to check it out, also the Volvo truck belt p/n for the same belt is 3895518.

  9. #24
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    18
    Man thanks for the reply I will check it out and see if I can find one of them and give it a try.

    Jeremy

    Quote Originally Posted by 93blkcoupe
    A tech at Paxton gave me the p/n for a Mack truck belt that is 55.5", 88gb449p555, might want to check it out, also the Volvo truck belt p/n for the same belt is 3895518.
    Mexican Based 331 all forged and H-Beamed
    Custom Grind Supercharger Cam
    AFR 205's
    Holley SystemMax Stage 3 Ported Intake
    Paxton Novi 2000

  10. #25
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240
    Quote Originally Posted by FoMoCo1
    6.87/3.00 uses a Mac Truck belt #88GB452P555 - 10 rib
    .......
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph

  11. #26
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    18
    Hey I am gettin ready to go get one of the Mac Turck Belts, I will keep everyone informed if it is going to work with the 7"/3.25" Pulley combo.

    Jeremy
    Mexican Based 331 all forged and H-Beamed
    Custom Grind Supercharger Cam
    AFR 205's
    Holley SystemMax Stage 3 Ported Intake
    Paxton Novi 2000

  12. #27
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240
    i doubt it will fit....the 55.5 fits pretty snug on my 3.00 pulley.....although i have been wrong before
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph

  13. #28
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    18
    Well got some good news the 55.5" mack truck belt worked with the 7"/3.25" pulley. I did have to bump the motor over a few times to get it on, but it worked.

    Jeremy


    Quote Originally Posted by FoMoCo1
    i doubt it will fit....the 55.5 fits pretty snug on my 3.00 pulley.....although i have been wrong before
    Mexican Based 331 all forged and H-Beamed
    Custom Grind Supercharger Cam
    AFR 205's
    Holley SystemMax Stage 3 Ported Intake
    Paxton Novi 2000

  14. #29
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240
    cool...let us know how much boost the 3.25 makes
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph

  15. #30
    Junior SCH Member
    Join Date
    Sep 2004
    Posts
    6
    I managed to squeeze a k080545 onto my Renegade setup with a 7 / 3.0 :)
    Last edited by Chad89GT; 01-07-2005 at 08:59 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •