What should I have my fuel pressure at?
I have: Stock shortblock and cam, Edelbrock Performer Upper & Lower, GT-40 Iron heads, 75mm MAF, 24lb injectors, Paxton FMU - not sure on the calibration, Equal length shorties, Off road H pipe, 65mm T.B., F-150 Pulley.
It is making 8lbs of boost.
Is it the FMU that came with the kit?
If so I believe its 12:1. Set your pressure to 40 psi vaccuum off. If it seems a little rich you could take some out.
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
Ya, it's the FMU that came with the kit, but I'm not sure if the previous owner changed discs or anything.
Posting Permissions
Reply With Quote
Bookmarks