Hey guys here is a shot of the Finished UPR 4" Powerpipe install with a self made heat sheild for old air box hole to the fender.
Hey guys here is a shot of the Finished UPR 4" Powerpipe install with a self made heat sheild for old air box hole to the fender.
Last edited by Ian; 10-09-2004 at 04:05 PM.
----------------
Rock n Roll :p
Pics never show, What am I doing wrong? I click the insert Image and the paste the path and it always shows like this.
----------------
Rock n Roll :p
Thanks Bud ! She's almost there :) What am I doing wrong when trying to post pics?
Also did you get my message on Friday night? Just email me or call !
See ya
----------------
Rock n Roll :p
Looks good man. I wish I could run the UPR pipe year round here. That is the only thing keeping me from buying one.:(
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
thanks bud. Why can't you run one year round? Do you have snow? ]
----------------
Rock n Roll :p
Sometimes, but the problem is A LOT of rain. My inner fendwells are notched for tire clearance from my tube K member moving the front wheels forward. This lets a lot of water into the wheelwell. I run my filter in the fender like a cold air kit would during the summertime. I've been caught in the rain a few times and after a while the water gets to the MAF and it will start to shut the car down.
During the winter I have to block the hole off in the fender like you did and run the filter inside the engine bay. Not the end of the world though as it is usually in the 30s and 40s during the winter.
hehe sorry for the long explanation.
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
Nice job on the install. I'll be installing mine sometime tomorrow - I hope. As for your car being almost there...I said that about mine a few months ago; she's still "almost there" :teeth:Originally Posted by Motleydrew
David
'03 Mach 1 (Fun)
'88 GT Hatchback (Fun squared)
My car is almost there for that last five years lol. It'll never be done.
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
hahaha, I know what you mean. For this year I just need tofind a serpentine belt to fit!!! Need something between 83.5 and 84.5 inches. This doesn't seem to be easily attainable! Next year I have to address my tranny issue, Go with more stall or convert to a standard? I am still debating this. I have not had good luck with trannies and am on my 3rd Lentech which seems to be holding up fine but TQ converter is now too small for my current setup.
take care guys !!!
----------------
Rock n Roll :p
Bookmarks