need to know what valve covers will clear this setup.
331, afr 185's w/ stud mount rockers, cobra intake, s-trim w/ vortech aftercooler.the guy i'm doing the car for would prefer aftermarket v/c's, and don't want to run an intake spacer. i have never used an aftercooler to know what will and won't work and don't want to do a trial and error thing.
any help appreciated.
thanks maurice
10.66 @125 w/ an a-trim
I think the trick flow vc's clear the intake alright. What rocker is he running. You should be able to squeak in some extra timing with the cooler for sure! ;)
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
i have a set of harland sharp 1.6 rockers that i am probably going to use, unless he bought something else. thanks for the reply.
maurice
10.66 @125 w/ an a-trim
10.66 @125 w/ an a-trim
by the way, thats awesome for an A-Trim!
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
I have a set of these
http://www.andersonfordmotorsport.com/50-index
They fit pretty good over my RR's and clear the bottom of my Gt-40 intake w/o a spacer.
why not use the stock ones on the fox body's and just grind out the baffles?
306 H/C/I and an S-Trim
I am going to be using Ford Racing Polished Tall valve covers. I have Scorpion 1.6 roller rockers on mine and even a stock valve covers with every baffle, groove, etc ground out they still hit. It is going to be a tight fit, but I think it should work.
Doesn't the filler have to be on the drivers side in order to work with the aftercooler?
Posting Permissions
Reply With Quote
Bookmarks