Smackdown set @ May 29.......Let the smack begin.

[regattacoupe]

I'll have a good view of those headlights for about 9 seconds. :D









































I'm gonna get blown clean off the track for the level of smack. :D

[BLOWNBY]

The line starts here Mr.fancy tranny. :signs:

You'll have to work that out with Team "ATRIMTERROR"

[regattacoupe]

LOL nice rims!

[BLOWNBY]

Those rims saved me about 30# off the car.

[atrimterror]

You'll have to work that out with Team "ATRIMTERROR"

Regatta is part of (TEAM ATRIMTERROR) :obscene:

[BLOWNBY]

Regatta is part of (TEAM ATRIMTERROR) :obscene:

Regatta--that hurts. Did bub mention I'm part Mexican...whatch out for the switchblade. You tires may end up with no air pressure. LOL

Scott Scott Scott...
You leave your team-mate early because you don't feel good (whah whah), yet you can get on the net and talk some smack.....only to leave me on my back helping YOUR team out. :shocked:

[regattacoupe]

Since my blower isn't the size of medium pizza I think I qualify on the 'street' team. :D

[blownzoom440]

try being a 1 man team like myself.it will be nice to race some fast cars like you gents!i better get practicing on the tree huh?

[BLOWNBY]

Since my blower isn't the size of medium pizza I think I qualify on the 'street' team. :D

How can you call a 3,000# gutted rat with your BOOTIE in it, a "Street Car." LOL You guys are the "Race Team, while I'm the Street team. With my full interior/exterior weight car, with a subwoofer in the back, PS, Heat, OD. etc etc.

Your starting to hang around Scott too much. Next I supoose you'll be calling your t-trim a "Baby Street/Race blower"

and mine the "Zues of Race Blowers."

[BLOWNBY]

Oh and here is what the AOD looks like. Scott I know you wanted to see it. And this baby weighs a ton. Whatever weight I saved with the K-member & coilover setup, I definatly made up here.

Oh and they already put a drain on it for me.

[BLOWNBY]

try being a 1 man team like myself.it will be nice to race some fast cars like you gents!i better get practicing on the tree huh?

Are you going to make it out to this event. Sounds like you have a pretty healthy setup as well.

[regattacoupe]

Nice setup! gutted rat eh? we shall see... :D

[BLOWNBY]

BTW you were talking about taking your factory crash bars oin the doors out. Are those bolted in or do they need cut out. I could use to lose a few pounds.

[regattacoupe]

It's actually alot of cutting.
1st you cut the goop that goes between the bar and the door they put in there so it dosen't rattle(dont pull on it as you'll be pulling on the door skin), cut the bar in half(cause it won't come out in one piece), and then cut the ends off.

I wouldn't do it but i'm gonna have my door panels off anyway taking my speakers out.

[BLOWNBY]

It is only like four screws and some retaining clips and 3 minutes later Wah Lah to get it off. I've had mine on and off many times.

Oh a neat trick is to spray the inside of the door panels with rubberized undercoating to quiet the pannels down and help eliminate rust. I know it may add a whole 12 OZ. a side but it is worth it. I on the other hand use dynamat as well on the outside shell. Gives the doors a nice thud not clang when doors shut.