Results 1 to 2 of 2

Thread: NEED PICS:Starter Relay Problems 93LX

  1. #1
    SCH Member
    Join Date
    Oct 2002
    Posts
    91

    NEED PICS:Starter Relay Problems 93LX

    I relocated my Starter relay in the drivers side fender along with all the wires.
    Im %100 sure i put back the correct wires on the correct solinoid terminals.Baisiclly all the wires go on the battery/alternator side except the starter wires(one thick black and one 12g thinner wire). I went to turn the ignition key, PROBLEMS

    1. Fuel Pump did not prime
    2. One wire on the battery side popped and split into 2 and began smoking
    3. Starter Relay did not click

    I tryed switching terminals and patched the burnt wire. Same thing happend started smoking. Anyone have pics of there starter solinoid. I must of f___ed up somewhere.ANY HELP WOULD BE APPRECIATED
    __________________
    1993 Mustang LX 5.0

    Engine:
    1993 Mustang LX 5.0

    306
    Paxton Novi2000 12psi
    Trickflow Track Heat Heads
    Trickflow Street Heat Intake
    Trickflow Stage 2 cam
    Scorpion 1:6 RR
    70mm BBK TB
    80mm Pro-M Shorty
    PowerPipe
    42# Injectors
    BBK 1 3/4 Long tube
    Flowmaster Catback
    Crane HI-6/PS2 Coil
    Every other Bolt on available

    518 RWHP 478 FT-LBS Torque

  2. #2
    Junior SCH Member
    Join Date
    Jan 2005
    Location
    Columbus GA
    Posts
    19
    You have the starter wires wrong. The smaller wire goes on a terminal by itself and the bigger one goes on the same side as all the rest. That wire that split is a fuseible link that went, so it would be best to replace it with another and not just straight wire it. As for the fuel pump, sound liek you didn't gornd the engine harness. That gorund has a plug about 6" inches up from the eyelet. It should of been grounded right by the starter relay when it was in the stock location. Allot of thime it gets unplgged and doesn't look lie a ground.
    Mike

    84 - T-top Notch Project

    *** My hot rod site**

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •