-
Junior SCH Member
Ford 24# Injectors
I have Ford 24# Injectors on my truck. How much constant fuel pressure is needed to efectively run these injectors? I am running 52#'s of pressure now, is it enough or too much?
-
SCH Moderator "SN Guru"
Everything I have on injectors shows 35psi to fully load the pintel.
-
Junior SCH Member
Ok, I backed off as much as I can on my regulator and I still have 50psi showing on my fuel gauge. I ran it and it will surge down to 42 to 43# at full throttle. What I am looking for is am I still sending too much pressure to the injectors or can they still perform properly at 50 psi.
-
SCH Moderator "SN Guru"
At WOT your at about the correct pressure I am just shocked that it idles at 50psi instead of down in the 30's. Your not hurting anything.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks