well, I picked up a touch of power with the aftercooled v2sq ;)
The aftercooler setup is nice to have when it's hot out!
it was 90 degrees and my 60' times sucked so I think it has a lot more in it, but my best run was:
1/8: 8.257 @ 87.9
1/4: 12.656 @ 113.61
60': 1.975
I figure I can get a 1.8 or better 60' and with some better air I should run a low 12.
My previous best was 13.7 @ 100 mph
Black 2001 Mustang GT
Vortech V2-SQ aftercooled kit. Lots of custom parts made by me
How much boost you squeezing out of that blower?
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Originally Posted by regattacoupe
10 psi right at 6000 rpm
Black 2001 Mustang GT
Vortech V2-SQ aftercooled kit. Lots of custom parts made by me
Nice improvment! Put a real tire on it and you could be real close to 11's.
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
some practice and I should be nice and low 12s ;)
Black 2001 Mustang GT
Vortech V2-SQ aftercooled kit. Lots of custom parts made by me
Posting Permissions
Reply With Quote
Bookmarks