plumbing help please

[timh]

Anyone know a good place to order a 3" rubber elbow? TIA
\Tim

[BLOWNBY]

http://www.hosetechniques.com/

They sell elbows and adapter hoses and transition ones as well. Blue, Black and red. Also have the T-Bolt clamps.

[MachGT]

http://shop.airflowonline.com/Merchant2/merchant.mv

not as pretty, but they do the job, plus they have a bunch of adapters that really come in handy, I used the 90 degree elbows, both 4" to 4" and 4" to 3.5" along with a 4" x 22.5 degree elbow for my power pipe

[BLOWNBY]

http://shop.airflowonline.com/Merchant2/merchant.mv

not as pretty, but they do the job, plus they have a bunch of adapters that really come in handy, I used the 90 degree elbows, both 4" to 4" and 4" to 3.5" along with a 4" x 22.5 degree elbow for my power pipe

DAMNNNNNN! I wish I new about that site last week. I have a T trim (3.75" inlet) and just bought the 4" -4" elbow from anderson ford $30 when I could have gootten the proper one that necks down from 4" to 3.75 " for $17. :freaks:

[MachGT]

Yeah, it cost me around $175 to do the pipe from the aftercooler to the throttle body and my power pipe with the black powdercoat on the inside and outside from that site.

I'm thinking about doing a junkyard turbo Fox someday and I'll definitely be using that site to plumb it all :)