I'm going! I'm running in Wild Street. I love this class. Last year at Bowling Green I finished 9th overall. This year I stepped up the car. I can't wait!!! I'm soooo pumped up.
If your going look for the 91 Trunk in Wild Street
I'm going! I'm running in Wild Street. I love this class. Last year at Bowling Green I finished 9th overall. This year I stepped up the car. I can't wait!!! I'm soooo pumped up.
If your going look for the 91 Trunk in Wild Street
331 Bennett Stroker/C-4/TFS Twisted Wedge/S-trim with 3.125" upper and 8" Hoping for 9's :teeth:
I am going Saturday and will look you up. Not racing this year because of no roll bar and can't stand ET. I will go and take pictures and movies for the Forums.
I will be there all weekend watching. Unfortunately no racing for me this year.
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
Most likely I'll be hanging around Walsh's rig.
331 Bennett Stroker/C-4/TFS Twisted Wedge/S-trim with 3.125" upper and 8" Hoping for 9's :teeth:
Me, atrimterror, mustang5069, a few other buds and three of our DRAG RADIAL buddies will be down there as well. Al of us Toledoians:teeth:
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Originally Posted by regattacoupe
Hey how much is Gas down there?
331 Bennett Stroker/C-4/TFS Twisted Wedge/S-trim with 3.125" upper and 8" Hoping for 9's :teeth:
What kind 87, 93, 100, 110, C-14 C-16 ??????
Where are you located anyways?
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
87 for the F-150 and 94/110 for the Trunk.
Plymouth, MI it's about 10 miles from Ann Arbor
Last edited by 91 trunk; 09-01-2005 at 02:04 PM.
331 Bennett Stroker/C-4/TFS Twisted Wedge/S-trim with 3.125" upper and 8" Hoping for 9's :teeth:
87 is $3.09 here and 94 is like $3.45. Columbus is usually just a little more than here. However, with the holiday weekend the cost may go up. 110 is usually like $5.00-$6.00 per gallon at the track. I can get turbo blue (110) at Speedway here in toledo for $4.29/gal.
The good stuff c-14 is $7.xx a gallon
and c-16 is $9.xx a gallon
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Me and my posse are in the Toledo Area and do some racin at Milan as well. i hope to be up there next Friday and see 9's, as I'm getting my bucket tuned up at Lidio's Weds.
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Damn that's cheaper then here
331 Bennett Stroker/C-4/TFS Twisted Wedge/S-trim with 3.125" upper and 8" Hoping for 9's :teeth:
I have an sealed 5 gal can of c-16 if anybody wants to buy it. I can bring it to Columbus. $50.
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
Ever hit the street with that thing?
331 Bennett Stroker/C-4/TFS Twisted Wedge/S-trim with 3.125" upper and 8" Hoping for 9's :teeth:
By the way, I read that C-14 is not very good to run on a blown car since the boiling point is much lower then
C-16 and much lower then what typical non-cooled intake air temps are. I read that from a VP rep.
Chris
9.05@152 with a T-Trim on BFG Drag Radials
NMCA SR6381
Oh yeah!--Street Car
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Posting Permissions
Reply With Quote
Bookmarks