Will a Anderson power pipe from a Paxton VR4 fit a Vortech S-trim on a 87-93 application?
Will a Anderson power pipe from a Paxton VR4 fit a Vortech S-trim on a 87-93 application?
You might just want to call Anderson and ask them.
347 J trim, Kennedys custom cam, and water/meth injection, Electromotive GT DFI
www.momsracing.com
Yes, the VR4, Novi 2000 and Vortech S-Trim use the same 4" pipe.
You'll need the reducer sleeve though as the s-trim inlet is 3.5" and the PP is 4" and the rubber elbow is 4".
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Originally Posted by regattacoupe
Blownby is correct. On my S-Tirm with the Power Pipe it has a reducer to fit to the Supercharger inlet.
Is the VR4 a 3.5" inlet as well?Originally Posted by BLOWNBY
You can just measure the diameter of the inlet with a ruler. It most likely will measure either 3.5" or 4.0".
VR4- 4" that is what the 4 means in the model number. The pipe is the same as in the bends and the reducer can even be purchased at the hardware store for under $5.
Bookmarks