IAN, any update on the 7.5 ASP pulley?

**lx-convertible** · 11-19-2002, 11:22 PM

i am a power addict, and want to boost my car over 450rwhp, and with this, i know it will put down what i want it to...

**Goliath5.0** · 11-19-2002, 11:33 PM

YOU WILL LOVE IT! Trust me! :D

**root** · 11-20-2002, 11:50 AM

I will check in with Jack and see what I can do...

We will need more users to sign up to get the discount I think.

Ian

**Jason915** · 11-20-2002, 12:17 PM

I would be possibly interested in the 7.5, how much boost is it worth and what other requirements would it make.

**Whistler** · 11-20-2002, 06:42 PM

Yep! I'd be in for a 7.5" pulley as well. Lets hope we get more interest so Ian can set that GP up!!

**root** · 11-20-2002, 06:51 PM

Jason915: You would gain 3-5 pounds of boost (it would max out the NOVI) All you may need is another belt.

Ian

**Jason915** · 11-21-2002, 03:12 PM

Max out the Novi in terms of RPM's?, what about a PS pump pulley (1:1) rule, and fuel requirements and boost retard needed? My engine is stock but I do have a 255 FP and adjustable Regulator would the 19's still be ok to use with the 7.5 as long as I used the FMU? Also would I need to upgrade my ignition? I plan on getting a custom discharge tube w/ a bypass set up also. I need to get as much boost as possible because I live at 6000 feet of altitude so I will never see full boost potential. Box stock might get me like 3 PSI so I can use a bigger pulley for sure.

**root** · 11-21-2002, 03:19 PM

OK guys we cannot get a deal unless I sell 25 pullies! Since that is impossible just go ahead and contact Jack @ www.musclemotors.com to order the pulley. It will run you $200 and take 3-4 weeks to make.

Jason: Yes when you use the stock blower pulley, the 7.5 crank is maxing out the RPM of the blower. You do not want to push it far past that. And yes you will also have to order a power sterring pulley from your local Ford dealer. 468LC has a 7" PS pulley that he picked up from a Ford wagon I think.

I am not sure how many pounds you will have but on a stock setup you will get 13-15 pounds. With that you will need more injectors and a BTM. With your elevation I am not sure how many pounds you will get.

Ian

**lx-convertible** · 11-21-2002, 11:14 PM

Ian, why could jack get a deal on the 8 inch with only 5 users, but this pulley he needs 25? that is a bit odd. is there any other outlet to use to try and get a GP together?

**root** · 11-22-2002, 01:59 AM

Hello,

Well I am not sure, I think Jack was hoping to get a deal with 5 but he never actually called. When he did call they told him 25. Jack is the cheapest around and there is no other way to go :( I wish there was.

Ian