After talking my sys over with some real experience I am a lil worried about a few things.
My Sys is as follows:
Intank pickup
-10 feed (push lock)
Filter
Yblock to dual 255s (GSL 392s) to another Yblock (all -10)
single -10 to the bay where I hit a bulkhead and change to -8 braided (for looks)
BBRC Rails
-10 X in the front
-6 return all the way back to the tank
60lb injs
Now after talking it over I'm aware I didnt need the -10, and -8 woulda been fine but I got such a deal on the -10 I couldnt pass it up. What I am worried about is will -10 have trouble suppling enuff pressure for the 60s with my dual inline 255s. If I ran a -8 feed from the Yblocks up would this cure the problem. I mirrored my setup after MMR900's setup which is good for 750rw boosted, but now I'm skeptical if this is enuff pump.
My setup will be in the low 600s..will I have issues
Thanks
chris
Bookmarks