Brand New Magnuson Products Standard Bypass Valve for supercharged vehicles.
Never installed.
Part No. 19-15-01-000

On E-bay auction at only $15- No Reserve
Click below to see Auction
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8076840761


Why do you need a bypass valve?
The best kept secret in forced induction is the little known bypass valve. This small valve, when properly installed between the supercharger and the air throttle body, allows the supercharger to become extremely efficient in terms of economy and parasitic power loss. Our M90 supercharger uses less than 1/3 of 1 HP at 60 MPH cruising. The bypass is operated by a vacuum actuator control unit that is normally closed. When vacuum is high (idle-cruising) the actuator opens the bypass valve, equalizing the vacuum pressure throughout the system. When boost is required (accelerating) the vacuum is decreased and the bypass valve instantly closes, causing pressure to increase into the cylinders. This equalized vacuum condition virtually eliminates the normal parasitic power loss of a forced induction system.

Magnuson Products, Inc. Standard Bypass was designed for those applications where space limitations or plenum/manifold shape or other considerations dictate a remote bypass. The four bolt flange should be mounted on the inlet tube or casting and the 1 1/2” tube should be plumbed to the discharge side of the supercharger.