Results 1 to 3 of 3

Thread: Vortech do it youself rebuild

  1. #1
    Junior SCH Member
    Join Date
    Nov 2005
    Location
    oakville ontario canada
    Posts
    5

    Vortech do it youself rebuild

    Hi Guys,I have a race T trim Vortech.I had a front seal leak so when I took off the front cover of the S/C the large bearing came apart with it.I took the bearing to a local bearing supply co and he is having a problem crossing the numbers,can any one tell me what the bearing/seal part numbers are.Also is the impellar balanced to the main shaft and can I remove it?If so what would be the torque spec?I want to replace all the bearings and seals,I also had seen some oil in the dicharge pipe.

    Thanks
    Nick
    www.nicksautomotive.ca

  2. #2
    Junior SCH Member
    Join Date
    Nov 2005
    Location
    oakville ontario canada
    Posts
    5
    ttt

  3. #3
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •