Just wondering how much boost I will need to get 500rwhp? See sig for combo :think:
Just wondering how much boost I will need to get 500rwhp? See sig for combo :think:
306 stock block, tfs aluminum heads and stage 1 cam, cobra intake home ported lower, 65mm t body, 42lb inj, pro m 80 mass air, V2 SQ 16 lbs 3.33 upper 8" lower, upr boost pipe, 373 gears,= 530 rwhp + 520 TQ 10.84@ 121mph while shifting 5th at the big end :teeth:
Software Says.....16.4psi @ 5800 rpm. You really need a 70mm T.B. the program says to reach 503 rwhp @ 75 degrees 80% humidty total timing at 19 WOT.
with race gase and some timing you'll only need ~ 13!
My old S-trim on buddies 302 and sytemax II and 13 psi made about 530rwhp on 110 w/ somewhat conservative street tune
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Originally Posted by regattacoupe
Ditto on the larger TB.
351 "stockshort block": -Vortech T-trim (21 psi), Trick Flow Heads, Lunati Cam, Weldon fuel system, Lentech AOD., 3.55 gears, 27" Hoosier QTP's, 3500# with me
-545 rwhp
-10.02 @ 135mph---Is 9.99 to much to ask?:freaks:
-1.42-- 60'
Originally Posted by regattacoupe
Thanks for the reply guys. So it looks like a 3.12 or 2.95 pulley and 70mm t body. Any thing else?
306 stock block, tfs aluminum heads and stage 1 cam, cobra intake home ported lower, 65mm t body, 42lb inj, pro m 80 mass air, V2 SQ 16 lbs 3.33 upper 8" lower, upr boost pipe, 373 gears,= 530 rwhp + 520 TQ 10.84@ 121mph while shifting 5th at the big end :teeth:
A Wideband for tuning, a tuning device(non listed)or you will be replacing headgaskets.
Thanks guys
306 stock block, tfs aluminum heads and stage 1 cam, cobra intake home ported lower, 65mm t body, 42lb inj, pro m 80 mass air, V2 SQ 16 lbs 3.33 upper 8" lower, upr boost pipe, 373 gears,= 530 rwhp + 520 TQ 10.84@ 121mph while shifting 5th at the big end :teeth:
Bookmarks