Where can I get a smaller blower pulley, smaller than 3.25", I can only find as small as 3.25" for a 87-93 fox novi1000 2belt setup, thanks.
Where can I get a smaller blower pulley, smaller than 3.25", I can only find as small as 3.25" for a 87-93 fox novi1000 2belt setup, thanks.
90gt 5speed, chp stroker 331 with forged internals including crank, afr 165's, custom grind cam, trickflow street heat intake, 1.7 rockers, 80mm pro M with morpheus power pipe and bosch bypass valve, full off road exhaust, revised novi 1K with 8"asp pulley, 255 in tank, 30lbers, accufab afr, msd6al with coil, 355's on stock suspension and street tires.
Dynojet#'s= 505rwhp, 469rwtq@7psi boost.
91 coupe 5speed:
fully ported stock heads, cobra upper and lower intake, 65mm TB, 75mm mass air, full exhaust, compucar adjustable kit, 155lph pump, king cobra clutch, msd coil and stock 308's and street tires.
13.9@102mph
Got my 3.00 Blower pulley straight from Paxton. Talk to Micah at Paxton he will help you out. But running a 3.00 blower pulley with a 8 inch crank pully is gonna max out the blower big time.
90 Convertible
Stock Bottom
Novi 1000(13PSI)
TFS Track Heat Heads
TFS #1 Cam
Edelbrock RPM 2 Intake
75mm T-Body
90mm LMAF w/maf.ia
SCT Tune
461 RWHP
509 RWTQ
Bookmarks