Results 1 to 3 of 3

Thread: popping noise from intake

  1. #1
    Junior SCH Member
    Join Date
    Oct 2006
    Posts
    2

    popping noise from intake

    i just changed my spark plugs in my 93 cobra to autolite 3923 .33 gap, and it was running fine then about a week later it started to pop under boost, it would show about 4-6# then pop pop and it doent feel like there is any power when i go WOT. i check everything and it all looks good, just can't find out what the problem is. i have tfs track heat heads, 30lb inj, and a crane ignition box can some one help me out, thanx

  2. #2
    SCH Moderator "SN Guru" speedytang's Avatar
    Join Date
    Dec 2002
    Location
    Marengo, Ohio
    Posts
    2,028
    Not sure your location since it is not posted but you might have to cold of a plug. If you can't find anything else I would go up to a 3924 .035 gap.
    Last edited by speedytang; 12-07-2006 at 05:52 AM.

  3. #3
    Junior SCH Member
    Join Date
    Oct 2006
    Posts
    2
    i checked everything again and found a bad spark plug wire, it was all white and cracked, figured that the header and wire were too close, so i bought a spark plug wire boot to keep the heat away and got another set of wires, i hope that this will fix that problem

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •