-
SCH Member
To users using blow off valves (esp. Speedy)
I currently have a bypass valve on my VR-4 setup. It is a plastic mitsubishi valve and it leaks a little boost, plus is tied into the intake tract. I think i am going to switch to a higher quality blow off valve (vent to atmosphere). What type of valve have you used? Carbed 71 Olds, so MAF is not a problem.
Speedy, I looked at your old thread, but you never mentioned which valve you choose. Care to share?
Thanks.
-
SCH Moderator "SN Guru"
I use a XS-Turbo unit that cost $100 from Jegs. It is adjustable so I had it open only at -18 vacuum so I did not need to hear that whistle noise all the time.
-
Senior SCH Member
You could also start by plumbing your present valve backwards, i.e the outlet becomes the inlet. If it's like the bosch valve this'll help.
F=MA
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks