Doing my YSi Install on my Thunderbird

**393bird** · 07-12-2007, 08:38 AM

I am installing a Driver Side Renegade YSi on my 393 stroker. Since the complete car project has been detailed on my web page, figured I would include this also. I am doing a carbed blow through, so a little different.

http://members.tccoa.com/392bird/sup...gerinstall.htm

It should be a blast to drive soon... :)

**393bird** · 07-30-2007, 01:59 PM

OK, I have the YSi installed, and mocked up the enclosure and discharge tube, and every thing is going fine except a few little things that I need parts for, and this little item.

What the heck is it, and where does it go?

**Hustler** · 07-31-2007, 01:54 PM

looks like a bracket that holds the throttle cable to the enclosure, hangs off the side is my guess

**393bird** · 07-31-2007, 09:18 PM

Originally Posted by Hustler

looks like a bracket that holds the throttle cable to the enclosure, hangs off the side is my guess

Yea thats what it is. I will get it hooked up this week. Thanks

**393bird** · 08-03-2007, 07:35 PM

I had to merge the top of this with the bottom of my Lokar piece.

Things that still need to be done:
1. Install new float bowls on carb
2. Relocate blow off valve mount
3. Fab up something for the Air Intake
4. Install new pressure referenced return regulator and fuel lines
5. Install new wide band O2 unit.