here is a dyno video i made last month after putting in a roller cam.
http://s27.photobucket.com/albums/c1...t=IMAG0025.flv
996hp/983ft,lbs
6krpm/4krpm
850ft,lbs at 3200rpm.
here is a dyno video i made last month after putting in a roller cam.
http://s27.photobucket.com/albums/c1...t=IMAG0025.flv
996hp/983ft,lbs
6krpm/4krpm
850ft,lbs at 3200rpm.
"69"Satellite,440,8-71,996hp at 6K/983TQ at 4K,4000lbs.
here are some better #'s to read.
14lbs w/IC 130* air
3200 931/567
3300 931.6/585.3
3400 932.1/603
3500 936.4 624
3600 939.8/644
3700952.2/670.8
3800 959.9/694.5
3900972.3/722
4000983.4/749
4100 981.2/765.9
4200 967.4/773.6
4300 956.5/783.1
4400961.9/805.8
4500974.4/834.9
4600 974.4/853.4
4700 970.6/868.6
4800 971.4/887.8
4900 970.6/905.6
5000 972.7/926
5100 962.1/934.2
5200943/933.7
5300926.5/935
5400 916/941.8
5500904.2/946.9
5600911.8/972.2
5700 904.6/981.7
5800 883.2/975.4
5900 865.2/972
6000 872.6 996.8
that is 1 w/IC
"69"Satellite,440,8-71,996hp at 6K/983TQ at 4K,4000lbs.
Impressive !
Greets, Marco
'91 Chevy 496SS, Edelbrock Pro-flo 2 injection, alu. GMPP heads, blowercam, coolmist water injection, turbo in the works.
*VIDEO* http://www.youtube.com/watch?v=6ZOdXg0TOdw
thanks!it was more than i expected.i reduced the pulley % by 10% and only lost 15hp.i went down to 10% under to get it running on the track and then we will think about getting it back up iff needed.
"69"Satellite,440,8-71,996hp at 6K/983TQ at 4K,4000lbs.
Hey I think I remember you from Moparts. I was on there as 69_M_Clone till
I had to sell my Dart.
i still hang there.i posted here to give info so otheres can learn from me.this is a cool information base.i got a barry grant 400gph pump to put on.that should do the job.i hope the weather hold out.i remember vagely your name.my gray matter dose not hold much info.LOL.
thanks for the reply.
"69"Satellite,440,8-71,996hp at 6K/983TQ at 4K,4000lbs.
Bookmarks