Results 1 to 2 of 2

Thread: anyone have to trim discharge

  1. #1
    SCH Member
    Join Date
    Mar 2003
    Posts
    64

    anyone have to trim discharge

    my cast discharge ys pushed past the TB at least a 1/4 and is a very tight fight. Anyone else see this?

  2. #2
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    46
    try reclocking supercharger a little it worked for me ,instead of cutting.though about too then reclockedit now its fine might have to get a longer hose coupler thats what i did
    90 linclon mark vii
    engine
    342, dart block,crower billet crank, olivier rods, je custom pistons 8to1 compression,cometic head gaskets,

    heads
    AFR 205 heads,60cc,75cc exhaust ports

    valve train
    crane roller 1.6 roller lifters,manely custom pushrods,
    crower tie bar solid lifters

    blower
    ys trim vortech blower
    custom 1/2 "blower bracket,10rib 3.3" blower , 7"crank pulley,
    cog drive setup 85 tooth/74 tooth crank, 27/30 thooth blower,
    anderson power pipe,vortech mondo blowoff valve, custom blower brace,

    exhaust
    bassani 1 3/4 shorties, 3"mac pro chamber, 3"pro dumps,

    induction
    holley system max intake,1"intake spacer, accufab 75 mm t -body,

    Engine managment system
    fast system bank to bank w/wideband o2,crane ingition hi 6 r box and coil,
    msd pro billet distubitor.

    cooling system
    fulidine radiator,edelbrock water pump,ramchargers dual fan setup,

    chassi
    custom 6pt roll cage, wild rides battle boxes,mm panhard bar,
    sub frame conn., tublar k frame, coil conversion from air ride,
    hpm custom control lower arms,adjustable uppers, kyb adjustable
    shocks front, bilstines in rear,adj.camber plates,

    rear
    8.8,welded axels tubes,axels braces,
    moser 33"s, strange locker , 3.73 gearset

    transmission
    lentech strip terminator 3000 stall speed convertor non lockup

    fuel system
    areomotive fuel system,
    custom sumped tank.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •