HELP:Morpheus Horspower pipe install

[tonyv]

For a fox body with Novi2K

I enlarged the hole in the fender to the point were the pipe is touching the plastic iner fender cover(just over the tire). As of now the pipe is not low enough,not allowing the discharge tube to clamp to the blower.

Any help would be appriciated.

[root]

So your inner liner is in? I would take it out so you can better angle the pipe and meter. Once you get the pipe setup and attached to the NOVI, then you can worry about the inner fender...

Ian

[tonyv]

I can't attach it to the Novi. Its misalighned to much. Its just way off. The only solution i can think of is to cut the plastice fender.

[UNTCHBL]

mine sit's really tight to the inner fender. did it without taking the inner fender out even.

Brandon