On my old setup, I had:
a-trim
36# injectors
Kirban AFPR
255 lph fuel pump
3.125 pulley
I saw 6 lbs of boost. My fuel pressure at idle was at 41lbs with the vacuum on. I made 342.4 rwhp and 376.4 rwtq. My A/F ratio was between 12.3-12.5 from 3000-4000, 12.6-11.9 between 4100-5000, from 5100-5500, it went from 11.8-11.7, and at 5600-6000 it's between 11.5-11.6. My timing is at 10 and my boost retard is .5.
Now, I'm going to just slap a SQ trim on there and put the 3.125 pulley on it. Will I be able to just remove the A-Trim, put on the SQ and just start hammering it? I don't want to blow the motor. Will my fuel setup be able to handle the SQ? I know I'll be making more power but I don't think it'll be enough to tax my fuel system right now. What do you guys think? More info on my car is at www.hplouis.corral.net I have a FMU and inline 255 lph fuel pump (sitting in my garage) but I'd rather not use them if I don't need them.
Thanks,
Henry
Bookmarks