Results 1 to 15 of 15

Thread: My ProCharger is on order!!

  1. #1
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012

    My ProCharger is on order!!

    Hey gang,

    Just wanted to thank everyone for their help, I decided on the ProCharger D1SC, 12 Rib, Sheetmetal intercooler, polished kit for my 88GT.

    I cannot wait to see it in person. I was able to meet some of the ProCharger team @ WFC 6, and they sold me on the unit!

    Watch for a complete install on the site...

    Ian

  2. #2
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    Wow, congrats Ian! Sounds like you have one heck of a kit on it's way. When will it arive? Snap a bunch of shots of the kit when it shows up. This will make a nice install article, that's for sure. Keep us updated as time goes on.
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  3. #3
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012
    Thanks Don :D

    It should be in my hands in 10 or so days. I will take lots of pics and do the install article right away. My car is ready, just need the blower :)

    Ian

  4. #4
    SCH Member
    Join Date
    Mar 2003
    Posts
    81
    Ian, congrats!!!!!!! i have the exact same setup (sitting in my living room) that i will start the install on this weekend. i can't wait till i can hear this beast!!!!!!!!! ken
    I can't hear you scream over my D1SC!!!!!!!!!
    PICS COMING SOON!!!!!!!!!!
    DSS super pro bullet 308
    D1SC pullied for 14# Intercooled
    80 mm Univer
    75mm Edelbrock T/B
    Trick Flow Track Heat Upper/Lower
    Twisted Wedge heads
    42# injectors/ no fmu/ PMS
    MSD Digital 6
    Flowtech Inductions- Ed Curtis Custom Cam
    ProMotion TKO and beyond.
    Steeda upper/lower control arms and anti roll bar
    Bullet Racing 6 pt Chrome moly roll cage
    Eaton Race Diff with 31 spline Moser Axles

  5. #5
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    TAKE PICTURES!!! I am all about seeing your works of art. You guys have really nice setups, show them off a little! Both installed (when it's done of course) and before the installation!
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  6. #6
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012
    Ken take pics!!

    Ian

  7. #7
    SCH Moderator
    Join Date
    Mar 2003
    Posts
    139
    Congrat's on your new purchase Ian. Take your time with the install and ask questions if you run into any snags.
    D-2R ProCharged R302 331
    1.393 60 ft.
    5.868 @ 123.119 (1/8)
    9.072 @ 156.953 (1/4)
    3400 lbs (with me)


    "ProCharger...not just blowing hot air"


    Photos: http://www.cafords.com/images/john91coupe/hi-res/
    Videos: http://www.cafords.com/mpg/john91coupe/

  8. #8
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012
    Thanks John,

    I am sure I will have a few questions as I go..

    I just pulled my motor out this week to check on the bottom end. I replaced the oil pump and checked the screen. The bottom end still looks brand new so I am good to go for now :D

    I have all the support parts needed. A Lentech trans, a complete fuel system, and more.

    It should leave sometime this week :D

    Ian

  9. #9
    Long Time SCH Member Doug's Avatar
    Join Date
    Nov 2002
    Location
    San Diego
    Posts
    1,115
    Hey Ian,
    Too bad I didn't know you were going the procharger route. I have a F1 that I picked up on a trade that is for sale.:(
    Doug

  10. #10
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012
    Thanks Doug but that is a little large for me :D

    Ian

  11. #11
    Junior SCH Member
    Join Date
    Mar 2003
    Posts
    40
    I am upgradin from a P-1SC to a D-1SC , I was also upgrading to an 8RIB setup from my current 6RIB. Why did you go to a 12RIB?
    Amount of Boost you want to eventually run ?


    JOhn
    99 Mustang Cobra
    P-1SC, 10 PSI
    Soon to be a D-1SC, 15 PSI

  12. #12
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012
    John,

    I went with the 12 rib because it will allow me to run a little less tension, and I think it looks killer :D

    Ian

  13. #13
    SCH Member
    Join Date
    Mar 2003
    Posts
    81
    i have the 12 rib on my D1SC and i agree with Ian, it looks killer. i got it by accident, Procharger called and asked me if i would accept the 12 rib since the 8 rib was on back order, at the same price. hmmmmmmmm, oh yeah!!!!!!!!!. ken
    I can't hear you scream over my D1SC!!!!!!!!!
    PICS COMING SOON!!!!!!!!!!
    DSS super pro bullet 308
    D1SC pullied for 14# Intercooled
    80 mm Univer
    75mm Edelbrock T/B
    Trick Flow Track Heat Upper/Lower
    Twisted Wedge heads
    42# injectors/ no fmu/ PMS
    MSD Digital 6
    Flowtech Inductions- Ed Curtis Custom Cam
    ProMotion TKO and beyond.
    Steeda upper/lower control arms and anti roll bar
    Bullet Racing 6 pt Chrome moly roll cage
    Eaton Race Diff with 31 spline Moser Axles

  14. #14
    Junior SCH Member
    Join Date
    Mar 2003
    Posts
    40
    I will bet that 12 RIB look killer.

    If they call 315 wide tires "Meats" what is the nickname for a 12 RIB belt? D@M!!!



    John

  15. #15
    Banned by Admin root's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    3,012
    Exactly :D

    Ian

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •