Page 1 of 2 12 LastLast
Results 1 to 15 of 23

Thread: blower no more

  1. #1
    Senior SCH Member
    Join Date
    Jun 2003
    Posts
    161

    blower no more

    my p600b took a crap on me today, so im going to run it on motor until I figure out what I want to do. my question is does anyone know how big of caps I would put on my oil line, do not want to remove them completly and help would be great. thanks anthony

  2. #2
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    What happened to it?! Didn't you just get it tuned?
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  3. #3
    Senior SCH Member
    Join Date
    Jun 2003
    Posts
    161
    the blower just stoped dead in its tracks, made a real loud high pitch sound, so I shut the car off and it would not start back up, so me and afriend tryed spinning the motor and it would not spin, so I took the belt off and tryed to spin the blower would not move, donnie told me he thinks its the transmission in the blower.
    351 canfield heads, trickflow intake, comp cam amd all the supporting hardware. p600b soon to do be d1 powered

  4. #4
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    It would have to be... the gears seized up inside or the bearings did, one or the other. The high pitched squeal was more than likely the belt slipping over the pulley after it stopped moving.
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  5. #5
    Senior SCH Member
    Join Date
    Jun 2003
    Posts
    161
    ya i never thought of that, sending it to procharger to get checked out, donnie told me to buy a t trim so im going to think about that.
    351 canfield heads, trickflow intake, comp cam amd all the supporting hardware. p600b soon to do be d1 powered

  6. #6
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    Weren't you tossing around a D1 or F1 before? Did you weigh all of your different blower options out? I would do that before jumping right into something else like that. T-Trim would fit your car nicely, but a nice D or F series would too... something to toss around.
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  7. #7
    Senior SCH Member
    Join Date
    Jun 2003
    Posts
    161
    I asked donnie what he thought was better d1or t trim and he told me to use the t trim because of the brackets, but he liked the d1 better.
    351 canfield heads, trickflow intake, comp cam amd all the supporting hardware. p600b soon to do be d1 powered

  8. #8
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    What about the brackets are better? I know that the T-Trim bracketry does not flex much, but I wouldn't see the ATI renegade (no A/C, no power steering) brackets being worse. The renegade brackets to my understanding are great and there is vertually no flex at all if any.

    Is there a big price difference? Would you be able to use anything that you have now with the D series? I would immagine you would.
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  9. #9
    Senior SCH Member
    Join Date
    Jun 2003
    Posts
    161
    Im working on that a guy on here is doing that right now, but I still want power steering.
    351 canfield heads, trickflow intake, comp cam amd all the supporting hardware. p600b soon to do be d1 powered

  10. #10
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    Yup... you can do the power steering re-location kit.
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  11. #11
    Senior SCH Member
    Join Date
    Jun 2003
    Posts
    161
    were do you get the power steering relocation bracket from, and with the renegade do you get the intercooler .
    351 canfield heads, trickflow intake, comp cam amd all the supporting hardware. p600b soon to do be d1 powered

  12. #12
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    Call up ATI. They have the relocation kits. They will be able to give you more speciffic details on their kits as to what comes with what.
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  13. #13
    Senior SCH Member
    Join Date
    Mar 2003
    Posts
    156
    My blower just seized up today! WTF! I really hope ATI plans to settle this with me somehow, being that this blower isn't a year old yet! I think I'm going Vortech after this crap!
    1995 GT
    Black on Black
    T-5
    D.S.S Pro Bullet 306
    and almost every part in the FRPP catalog.

    And a 'Strange' whistling sound under the hood courtesy of ProCharger......

  14. #14
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    Wow, that's no good... what blower do you have again?
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

  15. #15
    WA2FAST's Avatar
    Join Date
    Mar 2003
    Location
    Birmingham, MI
    Posts
    547
    You are still under warranty, so no worries. Even if you did not get the extended 3 year warranty, you still have the standard 1 year warranty, don't worry about it, they are good about taking care of their customers.
    ---Don---
    WA2FAST

    http://wa2fast.corral.net

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •