Hey guys, I started installing my novi 1000 in my 90gt and I have a few questions. I have all the brackets installed as well as the accesseries and blower, everything is mounted except for the tensioners and belts. My problem is that my blower belt is too short, I try to get it around the sc and crank pullies without the tensioner and it is too small by about half inch or so and then it would go on buy very tight and without the tensioner, my question is did I do something wrong? The back cast bracket gets installed to the cylinder head by 2 bolts, the 7/16's zinc coated one and the 3/8 hole beside the coolant hose right? Also, the discharge tube wont line up with the throttle body and the blower, its almost like the blower end has to be lowered. Please guys, any help would be greatly appreciated and I have no transportation until this car is on the road, thanks.
Bookmarks