Gonna hit the track friday night in NH ,anyone have an Idea what kind of numbers I might run. The car dynoed out with 413Hp and 393 torque at the rear. hoping for mid to low 11s thanks
Gonna hit the track friday night in NH ,anyone have an Idea what kind of numbers I might run. The car dynoed out with 413Hp and 393 torque at the rear. hoping for mid to low 11s thanks
yeah get it to hook low 11s should be easy. i know a guy who runs 10.70s in a vert with 424 rwhp if that tells you anything
Full weight car?.....Mid to high 11's......with good tires and a good driver
Mike
424=10.7...must be one hell of a light car with great suspension. Or are those HP through an auto?
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
Can't give you an ET guess without tire/suspension data but for your HP and running weight of say 3500# I'll guess mph of 114, and if you get any kind of traction, i.e. sub 1.9 60', I'll wager you just might break into the 11s, say an 11.90 or so.
Chris
i actually went back and checked and i was just a little off he went 10.90s@123 with 424 rwhp and now has 451rwhp and has went 10.77@126 1.57 60ftOriginally posted by lx-convertible
424=10.7...must be one hell of a light car with great suspension. Or are those HP through an auto?
its an AOD vert 3400lbs, jeff burbank (NO MANRZ from the corral if you know him)
I'll agree with the consensus, mid to low 11's but that'll depend on hook, track cond./elevation, driver, etc.
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Bookmarks