Results 1 to 4 of 4

Thread: Anyone put a novi 2000 on a bbc?

  1. #1
    Junior SCH Member
    Join Date
    Jun 2003
    Posts
    4

    Anyone put a novi 2000 on a bbc?

    Hi, I am new to this site. Unlike most of you I do not own a mustang. I have an old camaro. I am in the process of installing a novi 2000 on a big block. A 509 to be exact. I am going to blow thru the carb and want to start out with about 5-6 psi. I have right at 10:1 comp, so I do not want to pump a lot of air. I am planning on lowering the comp later. I have many questions, but to start: what size blower pulley should I use? I have a 7inch 10 rib crank pulley. Any help or suggestions will be greatly appreciated. Oh yeah, of course all of the brackets, carb bonnet, idler pulley, etc are one of a kinds....

  2. #2
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    Yes there was a guy that used to frequent this site that was putting one on a 502.

    I think his name was cosmo.

    Do a search on the site for that username and hopefully it turns up something.
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  3. #3
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  4. #4
    Junior SCH Member
    Join Date
    Jun 2003
    Posts
    4
    Thanks for the info. It looks like I might need a little different pulley combo than cosmo. But it is a place to start..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •