Im just curious to know what Cylinder Heads are u using?
Are you using the stock Novi Blower Pully?
Im very inpressed by your HP numbers using the stock cam.
Im just curious to know what Cylinder Heads are u using?
Are you using the stock Novi Blower Pully?
Im very inpressed by your HP numbers using the stock cam.
1993 Mustang LX 5.0
Engine:
1993 Mustang LX 5.0
306
Paxton Novi2000 12psi
Trickflow Track Heat Heads
Trickflow Street Heat Intake
Trickflow Stage 2 cam
Scorpion 1:6 RR
70mm BBK TB
80mm Pro-M Shorty
PowerPipe
42# Injectors
BBK 1 3/4 Long tube
Flowmaster Catback
Crane HI-6/PS2 Coil
Every other Bolt on available
518 RWHP 478 FT-LBS Torque
I believe doug is using afr 165's. I'm not sure though.
Brandon
Tony,
Here's the complete combo:
Stock shortblock 100K
AFR 165 heads
TFS Track Heat
70mm Mac throttle body
1 5/8 shorties, 2 1/2 high flow cats, 3 inch cat back
1.7 crane rockers
80mm Pro M MAF, Homemade power pipe
36 pound injectors-No FMU
Dyno tuned with chip
26 degrees total timing
Lentech AOD
3.73 gears
2800 pound coupe
472rwhp
435rwt
10.8@126 on 26x10.5x15 ET streets
No porting what so ever!!! Everything is installed out of the box.
Novi 2000-10 pounds of boost-stock pulleys
__________________
14-1 compression 402ci with a little nitrous
Thanks for the info doug. Looks like i will be adding AFR 165 and cam soon.
1993 Mustang LX 5.0
Engine:
1993 Mustang LX 5.0
306
Paxton Novi2000 12psi
Trickflow Track Heat Heads
Trickflow Street Heat Intake
Trickflow Stage 2 cam
Scorpion 1:6 RR
70mm BBK TB
80mm Pro-M Shorty
PowerPipe
42# Injectors
BBK 1 3/4 Long tube
Flowmaster Catback
Crane HI-6/PS2 Coil
Every other Bolt on available
518 RWHP 478 FT-LBS Torque
Bookmarks