Do i need a oil breather on my car when i install my 1k?
thanks brandon
Do i need a oil breather on my car when i install my 1k?
thanks brandon
Car -- 1987 LX 5.0 5 Speed Coupe
Mods --
NOVI 1000, new D.S.S. PRO short block low comp., AFR 165 PORTED
BY FTI ,CUSTOM CAM BY FTI ,1.6 Scorpion RR,
Edelbrock Performer RPM Intake, 70MM TB,7O MM COBRA MAF,
BBK1-5/8" HEADERS, , 24# INJ. COBRA COMP.,
2 CHAMBER FLOW MASTERS, 3.73, STEEDA UPPER AND LOWER
CONTROL ARMS, MSD 6AL W/ MSD PLUG WIRES, Ajd. flue presser regulator
With out a tune 289 rwhp 315 rwtq
NOVI 1000
Other Toys
2002 S/C F-150 Harley Davidson ed. #7900
2001 katana 600
If you have the stock valve covers, then no, you cap off your throttle body and run the hose from the valve cover filler to the airbox, all the hardware is supplied.
432 rwhp 404 rwtq.........11.76 @ 120mph on nitto's!!!
Novi 1000, 8lbs of boost, stock cam, performer intake and heads, 65mm TB, 75mm MAF, 1 5/8" long tubes, 3.55's, 555 DR's (dyno'd on mustang dyno)
Daily Driver
My idling Novi 1000 vid
1/4 mile run Sorry it's a little old now
Club Videos
Pics&Mods
It will allow unmetered air into the engine, which depending on ring blowby can cause lean surge problems, but the eec will detect the lean condition over time while in closed loop and compensate for it. This learning process starts over each time you reset the eec.
You have to decide for yourself if this (mostly) minor problem is worth it for what you gain running the breather element (which is not smog legal BTW). Someone else can fill you in on all the pros, I believe mostly it helps with the crankcase pressure pushing out the PCV valve problem.
Chris
Bookmarks