Results 1 to 6 of 6

Thread: what belt is every one using

  1. #1
    Senior SCH Member
    Join Date
    Dec 2002
    Posts
    117

    what belt is every one using

    i have a old style novi non separate drive what belts does everyone use ,just a question im getting a little slippage

  2. #2
    Senior SCH Member fanglemeister's Avatar
    Join Date
    Oct 2002
    Location
    Lehighton PA
    Posts
    435
    ttt

    This thread deserves some attention, not much in the archives.
    Chris

  3. #3
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    I have heard alot of good things about the GoodYear gatorback belt.

    I have no experience with it but I think Goliath used and loved it.
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  4. #4
    Senior SCH Member
    Join Date
    Dec 2002
    Posts
    117
    thanx i will try one

  5. #5
    Senior SCH Member lx-convertible's Avatar
    Join Date
    Oct 2002
    Location
    mass
    Posts
    473
    i used the gatorback in 3 configurations, stock pulley, f150 pulley and now 8inch pulley. saw 15psi on the dyno, NO SLIP. would highly recommend.
    Neil
    Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil

    Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.

    HP: 488.3
    TQ: 461.7 Tuned by FordChip.com

    11.77 @ 119.9
    Best 60ft-1.56
    New project 1991 coupe
    NEW TOY 1995 H/D Sportster

  6. #6
    Senior SCH Member
    Join Date
    Dec 2002
    Posts
    117
    how tight did u make it?????

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •