Here she is in all her glory.
Here is an installed pic with a glimpse of the ramchargers fan.
Here she is in all her glory.
Here is an installed pic with a glimpse of the ramchargers fan.
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
Wholy ****, that looks awsome!
432 rwhp 404 rwtq.........11.76 @ 120mph on nitto's!!!
Novi 1000, 8lbs of boost, stock cam, performer intake and heads, 65mm TB, 75mm MAF, 1 5/8" long tubes, 3.55's, 555 DR's (dyno'd on mustang dyno)
Daily Driver
My idling Novi 1000 vid
1/4 mile run Sorry it's a little old now
Club Videos
Pics&Mods
Wow!! That's sure to be a chick magnet!!! :D
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Steve,
Whats the diameter of that one?
Shes a beauty!!
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
Thanks guys.
Chuck it is a full 7.5 inch unit.
Keep in mind this is NOT an ASP unit or any other pulley manufacturers unit.
A buddy of mine handed his machinist at his work a stock pulley and said make one 7.5 inches and Poof here it is.
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
nice man! when are you going to dyno/track with that on?
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
Might be going to the track on a nice cool next saturday morning.:)
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
have you flogged it yet? how much boost?
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
I would say it's in the 11 to 12 PSI range neil.
Still trying to go to the track this weekend.:)
so is the bone yard booster 4sale now?
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
Already gone bro.:DOriginally posted by lx-convertible
so is the bone yard booster 4sale now?
One of our fellow Novipower members will be sporting some more power here soon.
Not really at liberty to say LOL Ian.Originally posted by Ian
How much did the shop charge?
Ian
It was an inside job through a friend of mine where he works. LOL it took a while and a few cases of beer but she is done.:)
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
ahh, the good old barter system. Works well when ya have the time to get 'em nice and drunk, lol.
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Bookmarks