where should base timing be set at. i have 8Lbs of boost. with boost retard MSD. canfield heads......more info check out :www.StreetFighterRacing.cc
Thanks Shifty
where should base timing be set at. i have 8Lbs of boost. with boost retard MSD. canfield heads......more info check out :www.StreetFighterRacing.cc
Thanks Shifty
Play it safe and start with 10 degrees, depending on the gas you are using. !0 degrees would be safe for pump gas.
393 stroker with YS-trim Vortech :-)
Originally posted by Brcuda
Play it safe and start with 10 degrees, depending on the gas you are using. !0 degrees would be safe for pump gas.
--
93 GT
I would set the base at 12 and the btm on 1 with 93 octane gas.
Eric
1990 Mustang GT
9.20 @151.18
Check out this forum for AOD's/C4's: Click Click Racing Forums
My Homepage
Download my spreadsheet to see where your total timing would be with different BTM setting and boost (with the A9L processor) here:
http://members.sigecom.net/Lorenz/bb...eed&timing.xls
Check out my blower tech site also at the bottom.
89 LX
Stock ported heads with 1.84" & 1.54" valves
Untouched GT-40 intake, Crane 2031, S-trim
11.13 @ 127 3370lb
500.3 RWHP
86 SVO
222 rwhp
My Basic Blower Tech Site
My Dynojet Resource Site
Bookmarks