Results 1 to 6 of 6

Thread: Couple pics A/C and Ps delete

  1. #1
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614

    Couple pics A/C and Ps delete

    Here are a couple of pics that show it is possable to run without accessories on the drivers side.

    468LC had posted about using the standard rotation waterpump and this is it.

    The owner says the water pump is from a 83 t bird I am going to see if I can find out about the pulley because as you can see its ribbed, but I dont think an 83 t bird came with a serpintine belt,
    It was more than likely a V belt.

    Does any one know about the belt for sure?
    Attached Images Attached Images
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  2. #2
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614

    another

    From a distance.
    Attached Images Attached Images
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  3. #3
    Long Time SCH Member Doug's Avatar
    Join Date
    Nov 2002
    Location
    San Diego
    Posts
    1,115
    I fyou are asking about the belt in the pic? It is a serpentine belt. The pulley bolts onto either waterpump. All you are changing is the pulley.
    Doug
    14-1 compression 402ci with a little nitrous

  4. #4
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    I realize that the belt in the pics is a serpinetine belt but was wondering if an 83 tbird used a serpintine belt or a v belt.

    Just want to see if I can find a small water pump pulley like the cobras for clearance with a 7.5 inch crank pulley that is ribbed!?!?

    I think this set up is sweet and would like to try it.

  5. #5
    SCH Moderator UNTCHBL's Avatar
    Join Date
    Nov 2002
    Location
    oklahoma city
    Posts
    1,890
    I sure would like to know if that is a standard rotation water pump for sure. I need one my self.

    Brandon

  6. #6
    Long Time SCH Member 468LC's Avatar
    Join Date
    Oct 2002
    Posts
    1,120
    Just look at the belt routing. It has to be standard. That looks clean as hell and I know it could be made to work on a Novi 1k install. I would like to do it with an ASP custom crank pulley and also with an ASP custom waterpump pulley because the wpump pulley should now be ribbed with the standard pump.
    Steve
    1996 Acura Integra GSR


    05 Pissat TDI

    99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •