One of The black rubber sleeves that came with my kit will not fit aroung my bbk 70 mm tb. Right now i am using my old bbk cold air kit sleeve and it looks like crap. is there a place that sells these. and shouldnt the one that came in my kit fit?
One of The black rubber sleeves that came with my kit will not fit aroung my bbk 70 mm tb. Right now i am using my old bbk cold air kit sleeve and it looks like crap. is there a place that sells these. and shouldnt the one that came in my kit fit?
Car -- 1987 LX 5.0 5 Speed Coupe
Mods --
NOVI 1000, new D.S.S. PRO short block low comp., AFR 165 PORTED
BY FTI ,CUSTOM CAM BY FTI ,1.6 Scorpion RR,
Edelbrock Performer RPM Intake, 70MM TB,7O MM COBRA MAF,
BBK1-5/8" HEADERS, , 24# INJ. COBRA COMP.,
2 CHAMBER FLOW MASTERS, 3.73, STEEDA UPPER AND LOWER
CONTROL ARMS, MSD 6AL W/ MSD PLUG WIRES, Ajd. flue presser regulator
With out a tune 289 rwhp 315 rwtq
NOVI 1000
Other Toys
2002 S/C F-150 Harley Davidson ed. #7900
2001 katana 600
I looked around forever and I finally found a place called Gregs Distributing, now I live up in Canada so I'm not sure if they'll have any places down south.
The stuff is really expensive, like it was a $120 for a foot of the stuff. Now they also had different quality stuff. When I made my powerpipe I bought a foot and a half of look alike stuff for $14.
Good luck.
432 rwhp 404 rwtq.........11.76 @ 120mph on nitto's!!!
Novi 1000, 8lbs of boost, stock cam, performer intake and heads, 65mm TB, 75mm MAF, 1 5/8" long tubes, 3.55's, 555 DR's (dyno'd on mustang dyno)
Daily Driver
My idling Novi 1000 vid
1/4 mile run Sorry it's a little old now
Club Videos
Pics&Mods
Try this place
http://www.hosetechniques.com/
Craig
Click Here for my POS
91 GT Vert
Edelbrock Heads/Intake/Paxton 9psi
Stock cam w/1.72RR's
36# Injectors, Pro-M 75mm bullet
Kenne Bell BAP, No FMU, Higgins Chip
Mac 1 5/8 shorties, 2 1/2 off road H
Tremec 3550, Eaton 31 spline, Mosers
SSBC rear disk conversion
Dyno 429HP / 408 ft-lbs R.I.P 331 in thw works
is this the same style hose that come in the kit
Car -- 1987 LX 5.0 5 Speed Coupe
Mods --
NOVI 1000, new D.S.S. PRO short block low comp., AFR 165 PORTED
BY FTI ,CUSTOM CAM BY FTI ,1.6 Scorpion RR,
Edelbrock Performer RPM Intake, 70MM TB,7O MM COBRA MAF,
BBK1-5/8" HEADERS, , 24# INJ. COBRA COMP.,
2 CHAMBER FLOW MASTERS, 3.73, STEEDA UPPER AND LOWER
CONTROL ARMS, MSD 6AL W/ MSD PLUG WIRES, Ajd. flue presser regulator
With out a tune 289 rwhp 315 rwtq
NOVI 1000
Other Toys
2002 S/C F-150 Harley Davidson ed. #7900
2001 katana 600
wow, sorry, somehow got a triple post!
sorry again(hehe)...see below
it doesnt look exactly like the hose in the kit but it is just as good if not better. (hosetechniques) above makes great boost hoses. i ordered from them back when i had my 300zx twinturbo. i got all new boost hoses & they were great quality. im going to get some of these in red to replace my current boost hoses. these silicon style hoses are much more plyable & easier to work with than the ones that come with the kit!
-justin
Bookmarks