Hey guys,
I need to know who can make this, or can tell me how to make, the inlet system in this picture. I would like to run the inlet from the back of the ProCharger to the top of my 4" cowl.
Pic:
Ian
Hey guys,
I need to know who can make this, or can tell me how to make, the inlet system in this picture. I would like to run the inlet from the back of the ProCharger to the top of my 4" cowl.
Pic:
Ian
Ian I have seen something very similar to that on a couple of renegade cars that were made by Anderson Ford Motorsport.They actually had another bend in them that layed the filter behind the intake along the cowl.You might also try Ed Curtis at Flowtech Induction.I called him about a one piece discharge tube he made that I saw in a magazine.Very cool guy to talk too and very helpful.
i second that opinion, ED is great. he made my custom cam and it idles like a prostocker, just like i wanted it. If ED can't make it, i bet he will know someone who can. Ken
I can't hear you scream over my D1SC!!!!!!!!!
PICS COMING SOON!!!!!!!!!!
DSS super pro bullet 308
D1SC pullied for 14# Intercooled
80 mm Univer
75mm Edelbrock T/B
Trick Flow Track Heat Upper/Lower
Twisted Wedge heads
42# injectors/ no fmu/ PMS
MSD Digital 6
Flowtech Inductions- Ed Curtis Custom Cam
ProMotion TKO and beyond.
Steeda upper/lower control arms and anti roll bar
Bullet Racing 6 pt Chrome moly roll cage
Eaton Race Diff with 31 spline Moser Axles
Ian,
My buddy is going to be making me that pipe soon, so I'll get him to make another one for you (if you don't have one by that point).
Darren,
That would be awesome! Since you and I have the same basic blower the pipe should fit perfect.
Ian
It looks to me like a 4" Rubber 90 degree elbow off of the blower and a 4" steel pipe out of it attached to the maf with a rubber coupler. Maybe I am blind though ;).
Chris
Bookmarks