Well looks like its time for a cage b4 the track i go to kicks me out anyone know a good place to get a BOLT in NO welding cage?
thanks
Mike
Well looks like its time for a cage b4 the track i go to kicks me out anyone know a good place to get a BOLT in NO welding cage?
thanks
Mike
Mike,
Kenny Brown makes a very nice powdercoated cage. I am using one in my GT and I could not be happier with it.
Ian
Autopower
Bolt in with no welding at all ain't gonna happen unless you race on outlaw tracks that don't tech cars.
If you want to be legal you could use the maximum motorsports bolt in bar and make it legal with some simple welds but the shipping on that fugger is more than the unit is it'self.
Bottom line, DON'T SKIMP here.
Both of the units listed above would not pass at my track.
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
The autopower is SCCA legal. For drag racing, go with a welded 6 or 8 point like Wild Rides or Wolferacecraft.
I understand those are legal in certian sanctioning bodies but Mike is a drag racer so I couldn't let him put an autopower monkey bar yo type setup in his car.;)
Well, you can make the Autopower legal with a good MIG welder:
That cage is INSANE!
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
Bookmarks