Is somebody sucking up?;) I didn't know we had a Ranger tech forum:DOriginally posted by UNTCHBL
Ian and chuck, I offer my services if you ever wana take me up on em. I kinda consider this place home.
Brandon
Is somebody sucking up?;) I didn't know we had a Ranger tech forum:DOriginally posted by UNTCHBL
Ian and chuck, I offer my services if you ever wana take me up on em. I kinda consider this place home.
Brandon
14-1 compression 402ci with a little nitrous
Let Brandon Moderate the SN-92 :D
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
Man and I thought my comment was low :D :pOriginally posted by Doug
I didn't know we had a Ranger tech forum:D
Dart Block 331 and No Power Adder, currently in pieces...... :weird:Originally Posted by Kato Engineering
Used to run 6.90 @ 100.4 mph in the 1/8th
ouch. lol, I'll have a car next weekend. I was going to keep it a surprise!
Brandon
90 strawberry coupe
Brandon,
What forums do you want?
Let me know and we'll set you up
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
which ever ones you really feel like need some attention.
I don't think anyone mod's the classifieds, I'm familiar with the novi2k, and I'm always in the general chat & tech stuff, so, do what you see fit. :) Just glad to help.
Brandon
90 strawberry coupe
Brandon, we will get you into the classifieds - good idea..
Ian
Ian you can also put me back in the chat forum if you want. I spend a lot of time in there.:)
LOL @ Brandon and ranger forum mod.:D
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
ha ha, very funny.
90 strawberry coupe
Currently unemployed.....I'll take mine back also.
D-2R ProCharged R302 331
1.393 60 ft.
5.868 @ 123.119 (1/8)
9.072 @ 156.953 (1/4)
3400 lbs (with me)
"ProCharger...not just blowing hot air"
Photos: http://www.cafords.com/images/john91coupe/hi-res/
Videos: http://www.cafords.com/mpg/john91coupe/
Ian, I could give doug a hand in the general tech forum also.
90 strawberry coupe
Originally posted by 468LC
Ian you can also put me back in the chat forum if you want. I spend a lot of time in there.:)
Ian seemed to be ignoring you Steve so I did it.
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
I know a thinf or two about the Vortech stuff if you need some help there :)
Eric
1990 Mustang GT
9.20 @151.18
Check out this forum for AOD's/C4's: Click Click Racing Forums
My Homepage
Bookmarks