Results 1 to 5 of 5

Thread: MAF electrical line modification after install?

  1. #1
    Junior SCH Member oray777's Avatar
    Join Date
    Nov 2003
    Location
    San Francisco Bay Area
    Posts
    38

    MAF electrical line modification after install?

    After moving the MAF closer to the Fenderwell opening will i have to lengthen the wires? I hope i don't have to do this but if i have to, better make sure what i'm doing first.

  2. #2
    Junior SCH Member oray777's Avatar
    Join Date
    Nov 2003
    Location
    San Francisco Bay Area
    Posts
    38
    Let me rephrase the question. After installing your SN supercharger as the instructions tell you after mounting the MAF closer to the fenderwell did you have any problems with the length of the wiring? Was it long enough?

  3. #3
    SCH Moderator "SN Guru" speedytang's Avatar
    Join Date
    Dec 2002
    Location
    Marengo, Ohio
    Posts
    2,028
    Wires are fine till you put it in the fender then you will be short.

  4. #4
    Junior SCH Member oray777's Avatar
    Join Date
    Nov 2003
    Location
    San Francisco Bay Area
    Posts
    38
    Okay that's all i need. Thanks.

  5. #5
    Junior SCH Member oray777's Avatar
    Join Date
    Nov 2003
    Location
    San Francisco Bay Area
    Posts
    38
    Originally posted by speedytang
    Wires are fine till you put it in the fender then you will be short.
    Actually i did have another question. Is it really beneficial to put your entire MAF inside the fenderwell? I can understand getting longer tubing and putting the air filter in the fenderwell to pull in more cool air. For me I would just wrap the MAF and duct with Heat resistant wrap. Beats havin to stretch out those sensitive wires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •